HAPTICORE mini 14 TW Standard
Key features
- Small form factor with only 14 mm diameter
- Low base torque of less then 1 mNm
Technical Data
| General | |
|---|---|
| Diameter | 14 mm |
| Height | 24 mm |
| Weight | 8.2 g |
| Electronics | |
| Sensor | 12 Bit |
| Sensor resolution | 0.1° |
| Sensor placement | Integrated in the shaft |
| PCBA | Only sensor |
| Electrical interface (connector) | FFC/FPC 6POS 0.5 mm PITCH 180° SMT TYPE, ZIF |
| Electrical interface – Standard protocols | I²C (Fast Mode, Fast Mode Plus) |
| Supply voltage Coil | 5 V |
| Supply voltage Sensor | 3.3 V (+2.8 V to 3.5 V) |
| Max. coil supply current | 400 mA @30 s |
| ESD protection | IEC61000−4−2 Level 4 Contact Discharge ±8kV Air Discharge ±15kV |
| Mechanics | |
| Mounting point | Dual mounting points |
| Mounting diameter @ customer interface | Clicked into mounting bracket |
| Alternative mounting depth adapters available | No |
| Push function | No |
| Material | |
| Exterior MRF chamber | Metal |
| Shaft | Metal |
| Push mechanism | N/A |
| Performance data | |
| Operating temperature range | 0°C to +40°C |
| Max. barrier torque | min. 12 mNm at 400 mA coil current |
| Max. base torque* | less than 1 mNm |
| Compliance | |
| ROHS/REACH | Yes |
*may vary due to installation conditions
Documents
Hardware order options
