HAPTICORE 14-P001X1

Key features

  • Typical applications: Computer Peripherals, Consumer Electronics, Smart Home appliance
  • Designed for 1 Finger forces
  • Rotational life: 1.000.000
  • Small form factor with only 14 mm diameter
  • Low base torque of less than 1 mNm
  • Dual mounting points for thumb-wheel application

Technical Data

General
Diameter14 mm
Height24 mm
Weight8.2 g
Electronics
Sensor resolution0.1°
Sensor placementIntegrated in the shaft
PCBAOnly sensor
Electrical interface – connectorFFC/FPC 6POS 0.5mm PITCH 180° SMT TYPE, ZIF
Electrical interface – sensorI²C (400 kHz)
Rated insulation voltage – coil5 V
Supply voltage – sensor3.3 V (+2.8 V to 3.5 V)
 Minimum coil driver supply voltage 3 V for barrier / 2 V for ticks
Max. coil supply current400 mA for 30s
ESD protectionIEC61000−4−2 Level 4
Contact Discharge ±8kV
Air Discharge ±15kV
Mechanics
Mounting pointDual mounting points
Mounting mechanismClicked into mounting bracket
Push functionPossible (depends on mounting bracket design)
Tilt functionPossible (depends on mounting bracket design)
Cover mounting mechanismScrewed
 Recommended cover diameter
17 to 30 mm
Material
Exterior MRF chamberMetal
ShaftPlastic
Magnetorheological materialMagnetorheological powder (MRP)
Performance data
 Lifetime rotations1.000.000
Operating temperature range0 °C to +40 °C
Storage & Transport temperature range
-20 °C to +65 °C
Max. barrier torque > 12 mNm at 400 mA coil current
Mean base torque ≤ 1 mNm
Compliance
ROHS/REACHYes

Documents